Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

BS 1451-1 Area of application for B S-20 pipes

Status
Not open for further replies.

zaayro

Mechanical
Joined
Feb 24, 2012
Messages
4
Location
OM
Hi Friends

We have Polypropylene pipe series S-20 B installed the pipe under the following conditions :

·Underground installation below the building slab and not outside the building.
·Depth from 400 mm to 1200 mm below the building
·The building slab is supported by plinth beams from around
·Fluid is condensate water from the AHU and FCU

we came to know that S-20 B can only be installed above ground , but given the fact that we have already installed we want to know what is the level of impact on the performance we are talking of? what is the severity we are talking off? what can be done or precaution that still can be taken off?

thanks for the help in advance!!!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top