Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

/bRotating shaft

Status
Not open for further replies.
kathir

kathir

Mechanical
Joined
Jul 11, 2001
Messages
9
Location
US
i need the details of Constraints to fix the shaft,which is connected to roller bearing at their ends.

Shall we take it as radial,axiallly locked ,allowing tangential dof only is it corect,

i need the clarification any one could help on this issue
 
Status
Not open for further replies.

Similar threads

ingeeneer
  • Locked
  • Question Question
Shaft Dimensioning FEM vs. Analytical
Replies
2
Views
183
ingeeneer
ingeeneer
namelessudhay
  • Locked
  • Question Question
How are notch or stress concentration factors in FEA of shaft strength considered?
Replies
6
Views
801
rb1957
rb1957
lenovo1
  • Locked
  • Question Question
Shaft In Bending
Replies
4
Views
409
realtime2
realtime2
silkyslim
  • Locked
  • Question Question
Simple Mechanics problem - stepped shaft uniform load
Replies
11
Views
406
rb1957
rb1957
gio1
  • Locked
  • Question Question
fatigue calculations on shaft in torsion
Replies
18
Views
1K
rb1957
rb1957

Part and Inventory Search

Sponsor

Back
Top