Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Broken view

  • Thread starter Thread starter bung
  • Start date Start date
Status
Not open for further replies.
B

bung

Guest
Can any body help me to make a broken view using spline?



Thanks
 
views/add view select broken. Select horizontal or vertical. Pick the points you want to break at. Then sketch a spline.
 
Status
Not open for further replies.

Similar threads

M
Create a part or view
Replies
1
Views
2K
msiva1981
M
M
Custom Cross sections in Creo View
Replies
0
Views
2K
msiva1981
M
B
How to model obstructions to a camera field of view (FOV)?
Replies
0
Views
2K
baby_bamboo
B
Symmetri
  • Locked
  • Question Question
Creo Shaded Drawing View with Environmental Lighting
Replies
2
Views
711
looslib
looslib
M
Layer status inconsistency in drawing views
Replies
0
Views
6K
mdemers
M

Part and Inventory Search

Sponsor

Back
Top