Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

British Standard to US Equiv 4

Status
Not open for further replies.
drbauer

drbauer

Mechanical
Joined
Feb 23, 2006
Messages
5
Location
US
We have been working with somw older British drawings and re doing them for use here. Does anyone know of a good source for converting the BS material numbers to usable ASTM equivalents
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

dozer
  • Locked
  • Question Question
EN 10025 S235JR Plate in US
Replies
8
Views
1K
dozer
dozer
Akoll
  • Locked
  • Question Question
Dear All, which standard and leve
Replies
6
Views
719
mfgenggear
mfgenggear
BuonGiorno
  • Locked
  • Question Question
Force fitting a sleeve onto shaft when designed to be a shrink fit.
Replies
3
Views
2K
dgeesaman
dgeesaman
D
  • Locked
  • Question Question
etchant to confirm if silver brazing is on ferrous metal surfaces
Replies
15
Views
6K
dtimberlake
D
rollingcloud
  • Locked
  • Question Question
Best method to verify NI/CR plating composition?
Replies
7
Views
866
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top