Brin...
Per ASM Hdbk Metalic Materials Specification Handbook 4th ed, [BS] L40 is obsolete: replaced by L65.
There was an Eng-Tips thread on BS L65, 7 Mar 08, thus:
Per IHS Standards Expert
BS L65 Bars and Extruded Sections of Aluminium-Copper-Magnesium-Silicon-Manganese Alloy is withdrawn, and is superseded by
BS L168 Specification for
Bars and extruded sections of aluminium — copper — magnesium — silicon — manganese alloy — (Solution treated and artificially aged) (Not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
The British alloy designation system always hurts my brain... especially when US cross-over/equivalents are necessary.
Regards, Wil Taylor
o Trust - But Verify!
o We believe to be true what we prefer to be true.
o For those who believe, no proof is required; for those who cannot believe, no proof is possible.
o Unfortunately, in science what You 'believe' is irrelevant. ["Orion"]
o Learn the rules like a pro, so you can break them like an artist. [Picasso]