Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bridge Engineering

Status
Not open for further replies.
Varma A.

Varma A.

Geotechnical
Joined
Mar 18, 2020
Messages
7
Location
NP
How to determine the compression and tensile stiffness of Compression seal Expansion Joint?
 
Sort by date Sort by votes
You might get better answers if you post in the Bridge Engineering forum. Sounds like a property that would be provided by the manufacturer.
 
Upvote 0 Downvote
AASHTO may have some reference, but typical seals shall be durometer 60. To convert to the Young modulus use these formulas: In typical bridge design these forces are disregarded, as their magnitude is irrelevant to the structure.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

lboada
  • Question Question
bridge foundation
Replies
4
Views
772
human909
human909
volcomrr
  • Locked
  • Question Question
Private Pedestrian Bridge
Replies
8
Views
7K
volcomrr
volcomrr
eberger
  • Question Question
DAM ENGINEERING-RISA FOUNDATION
Replies
5
Views
6K
strucbells
strucbells
hdb35
  • Question Question
Bridge Expansion Joint/Bearing Movement Design
Replies
2
Views
658
jhnblgr
jhnblgr
K
  • Locked
  • Question Question
CSI Bridge model - area model
Replies
0
Views
3K
kami125
K

Part and Inventory Search

Sponsor

Back
Top