Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bridge Design Book
- Thread starter Jackcsh
- Start date
BRidge Engineering by Demitrias Tonias is a good beginners book for the typical bridges you'll see the most of.
W.F. Chen has a three volume set of bridge handbook but I've only seen one so I can't comment.
Xanthakos has a nice handbook but as with all handbooks there is just enough material on a lot of aspects of bridges.
Regards,
Qshake
![[pipe]](/data/assets/smilies/pipe.gif "[pipe] [pipe]")
Eng-Tips Forums:Real Solutions for Real Problems Really Quick.
W.F. Chen has a three volume set of bridge handbook but I've only seen one so I can't comment.
Xanthakos has a nice handbook but as with all handbooks there is just enough material on a lot of aspects of bridges.
Regards,
Qshake
Eng-Tips Forums:Real Solutions for Real Problems Really Quick.
bridgebuster
Active member
Ditto on "Bridge Engineering" by Tonias.
I also have the "Bridge Engineering Handbook" edited by Chen; covers a multitude of topics but not much in the way of examples.
There's also "Bridge Inspection & Structural Analysis" and "Bridge Rehabilitation & Replacement" by Sung H. Park - some of the info is a bit dated (1980) but they're still useful and reasonably priced.
"Design of Modern Steel Highway Bridges" and "Design of Modern Concrete Highway Bridges" by Conrad Heins. Both are good books with examples. In the versions published in the early 1980's there were some typos (more than what would be expected;maybe they've been fixed)but they're still good books.
The National Steel Bridge Alliance (part of AISC) publishes what used to be the US Steel "Highway Structures Design Handbook"
The AASHTO website, has several examples of LRFD design, including curved steel girders.
You can download some old, but very good,textbooks from
I also have the "Bridge Engineering Handbook" edited by Chen; covers a multitude of topics but not much in the way of examples.
There's also "Bridge Inspection & Structural Analysis" and "Bridge Rehabilitation & Replacement" by Sung H. Park - some of the info is a bit dated (1980) but they're still useful and reasonably priced.
"Design of Modern Steel Highway Bridges" and "Design of Modern Concrete Highway Bridges" by Conrad Heins. Both are good books with examples. In the versions published in the early 1980's there were some typos (more than what would be expected;maybe they've been fixed)but they're still good books.
The National Steel Bridge Alliance (part of AISC) publishes what used to be the US Steel "Highway Structures Design Handbook"
The AASHTO website, has several examples of LRFD design, including curved steel girders.
You can download some old, but very good,textbooks from
minorchord2000
Structural
PCI publishes some very fine bridge analysis and design manuals. Check out this link.
- Status
Similar threads
