Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

braided tubing with ptfe inner

Status
Not open for further replies.
rkoct5

rkoct5

Mechanical
Joined
Jul 13, 2012
Messages
3
trying to manufacture braided pebax tubing w ptfe inner layer. Having a hard time keeping one of braid square during assembly. Ptfe layer extends past braid on that end. Hence cannot square cut. Anyone with braided tubing manufacturing experience using heat shrink, please suggest any tips.
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
PTFE
Replies
1
Views
2K
EdClymer
EdClymer
V
  • Locked
Sealing material PTFE alternatives
Replies
1
Views
2K
bcd
bcd
Johnwoo1991
  • Locked
  • Question Question
Rptfe and Ptfe Cg
Replies
0
Views
906
Johnwoo1991
Johnwoo1991
1
  • Locked
  • Question Question
What is the best nylon/polymer filament for a foldable platonic solid with living hinges?
Replies
8
Views
10K
btrueblood
btrueblood
dogbural
  • Locked
  • Question Question
Injection moulding with thin wall thickness
Replies
7
Views
2K
Pud
Pud

Part and Inventory Search

Sponsor

Back
Top