Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Box around dimesion in drafting(basic) 1
- Thread starter ag2001
- Start date
-
1
- #2
JohnRBaker
Mechanical
You'll find that option where you set the tolerance values on a dimension.
What version of NX are you running?
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
What version of NX are you running?
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
click on the dimension on the drawing with your mouse button -> Style -> Dimension Tab -> approx. 1/5 of the way down you will see a tolerance pull-down that has all the different types of +- tolerances, the basic box is at the very bottom, click on that
Jerry J.
Milwaukee Electric Tool
Jerry J.
Milwaukee Electric Tool
- Thread starter
- #4
- Status
