Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Boundary conditions Connections and loads

Status
Not open for further replies.
paulpatrick

paulpatrick

Mechanical
Joined
Aug 27, 2005
Messages
49
Location
GB
How do you know if your Connection methods and Loads are applied in the manner the same as Product your building? Deigning a gate system for the bottom of a big grain vessel.

IS this an experience thing or is the some guide lines somewhere ?
 
Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

V
  • Locked
  • Question Question
Boundary conditions and post processing for Planar tension test
Replies
0
Views
606
vsw
V
LS_SMS
  • Question Question
Applied Acceleration At Boundary Condition
Replies
2
Views
6K
dgeesaman
dgeesaman
shiraz883
  • Locked
  • Question Question
Stresses increase on adding thermal boundary conditions/ thermal load
Replies
1
Views
482
SWComposites
SWComposites
andradesilva
  • Locked
  • Question Question
how to apply symmetry boundary conditions in ANSYS workbench 2023 R1
Replies
0
Views
452
andradesilva
andradesilva
Ahmed_abdelgawad
  • Question Question
CDB and ‘prnsol,s’
Replies
0
Views
6K
Ahmed_abdelgawad
Ahmed_abdelgawad

Part and Inventory Search

Sponsor

Back
Top