Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Books

Status
Not open for further replies.
proinwv2

proinwv2

Mechanical
Joined
Mar 12, 2003
Messages
145
I am looking for recommendations on technical design handbooks on stamping or drawing sheet metal. I will be designing a moderate sized part of mild sheet steel and would like to have information on procedures, bend radii, depth of draw etc. so that the first drawing represents something that the fabricator can look at without having to suggest major changes.

Any suggestions are appreciated.

Paul
 
Sort by date Sort by votes
SME Die Design Handbook.



Mike Halloran
Pembroke Pines, FL, USA
 
Upvote 0 Downvote
ASM Handbook Volume 14B, Metalworking: Sheet Forming
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top