Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Books for heat treatment
- Thread starter clun
- Start date
THE best book that i know about is the "HEAT TREATER'S GUIDE Standard Practices and Procedures for Steel", Copyright by ASM. I have this one, but there is also one that exists for non-ferrous materials (Al). In there, there is heat treatment procedures for Carbon steels, Alloy steels, Tool Steels, Stainless Steels, and so on. For each grade you have normalizing, stress relieving, annealing, hardening, tempering, etc.
Good luck!
Good luck!
The following are links to the books mentioned by ijzer and COKA. They are excellent references:
Heat Treater's Guide: Practices and Procedures for Nonferrous Alloys
Heat Treater's Guide: Practices and Procedures for Irons and Steels, 2nd Edition
ASM Handbook Volume 04: Heat Treating
If you are not already a member of ASM, you may want to consider joining. Members receive substantial discounts on books, journals, etc.
Heat Treater's Guide: Practices and Procedures for Nonferrous Alloys
Heat Treater's Guide: Practices and Procedures for Irons and Steels, 2nd Edition
ASM Handbook Volume 04: Heat Treating
If you are not already a member of ASM, you may want to consider joining. Members receive substantial discounts on books, journals, etc.
- Status
Similar threads
- Question
- Question
- Locked
- Question