Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
book of steel
- Thread starter miller134
- Start date
MikeMilburn
Mechanical
Most companies will send you a spec book for the asking, two companies I deal with are:
Russell Metals
28 Lakeside Park Drive
Lakeside
Nova Scotia
Canada
B3T 1A3
-or-
Leroux Steel Inc.
1331,rue Graham-Bell
Boucherville
Quebec
Canada
J4B 6A1
Of the two books, the one from Russell has more info about diffrent metals, brass, s/s, copper etc...Mike
Russell Metals
28 Lakeside Park Drive
Lakeside
Nova Scotia
Canada
B3T 1A3
-or-
Leroux Steel Inc.
1331,rue Graham-Bell
Boucherville
Quebec
Canada
J4B 6A1
Of the two books, the one from Russell has more info about diffrent metals, brass, s/s, copper etc...Mike
Once again, I agree with Mike. I also use Russell Metals and their fabulous handbook on steel/aluminum/brass/copper and all related alloys.
The Russell Metals handbook is a newer version of the older Drummond McCall handbook, if that helps any.
If you're in Canada Russell Metals has branch offices across the country.
best regards,
Paul R
The Russell Metals handbook is a newer version of the older Drummond McCall handbook, if that helps any.
If you're in Canada Russell Metals has branch offices across the country.
best regards,
Paul R
Guest
Please take a look at my website and look for the link to ARBED where you can find all the steel section properties in digital format.
- Status
Similar threads
- Question