Bonding Mazak casting?

[dbennett]

Hi Guys,
I have a small screw in fitting that makes an oil return outlet for an rotrex supercharger. My issue is that i need to change the angle of the outlet due to clearance, I have cut and made the changes required to the angle and now have the issue of bonding the 2 peices back together again. Any help on a product would be greatly appreicated.

Darren

 

[Goahead]

Is your application temperature limited?
Are you looking for a suitable structural adhesive?

Regards,

http://www.welding-advisers.com/

 

[dbennett]

The oil passing through this union will get no hotter than 120deg. and yes we are looking for a suitable adhesive please.. Do you have anything in mind ?

 

[Goahead]

You may wish to obtain professional advice for your specific application from any one of the following and possibly also other developers/manufacturers:

http://www.devcon.com/devconcatsolution.cfm?catid=37

http://www.3m.com/product/information/Scotch-Weld-Structural-Adhesive-Film.html

http://www.loctite.com/int_henkel/loctite_us/

Regards,

http://www.welding-advisers.com/

 

[MintJulep]

How about brazing?