Bonding Aluminium to Plyboard

[eski1]

Hi

Can you please advise me on the best thing to Bond 3mm sheets of Aluminium to 16mm Structural Ply board .
The size of the sheets are 800mm wide x 2700 high .
Its for high Spec Shop Cabinets which are inside a retail shop so there needs to be no chance of it coming unstuck & must adhere the sheet all over so as we don't get ripples at all.

The answer might be as simple as contact adhesive , but just wanted clarification.

thanks in advance
chris

 

[CoryPad]

If the environment is climate controlled indoors, then probably just about any adhesive would work. If the forces are high, choose structural adhesive. The adhesive manufacturers are helpful: 3M, Loctite, Devcon, MasterBond, Sika, etc.