Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

BOMs of Family Tabled Assemblies

Status
Not open for further replies.
mikehmi

mikehmi

Mechanical
Joined
Nov 6, 2002
Messages
1
Location
US
I have a family tabled assembly with multiple instances. I would like to create a BOM that shows the components in rows and the instance in columns with the quantities inside. I have been able to show a 2D repeat region that shows everything but the quantities. All I can get inside is the Y or N denoting if that particular instance has that particular component. Is there anyway to accomplish this without having to make a separate BOM table for each instance?

Thanks for the help.
 
Status
Not open for further replies.

Similar threads

B
  • Locked
  • Question Question
with lookup_inst function variants change family table via parameters
Replies
1
Views
2K
3DDave
3DDave
whatev-nvm
  • Locked
  • Question Question
OBJ of a simp rep of an assembly gets exported with incorrect coordinate system
Replies
0
Views
1K
whatev-nvm
whatev-nvm
freerangequark
  • Locked
  • Question Question
Control of a dimension or parameter in simplified rep?
Replies
1
Views
2K
3DDave
3DDave
S
Obsoleting family table instances
Replies
0
Views
2K
sadrok-01
S
Somers
  • Locked
  • Question Question
Creo - year of creation in a note
Replies
12
Views
1K
Somers
Somers

Part and Inventory Search

Sponsor

Back
Top