Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

bom-balloon clean up

Status
Not open for further replies.

vanpeltnv

Industrial
Joined
Feb 10, 2004
Messages
27
Location
BE
How can we place bom balloons on a drawing
so that they are allways on the same spot.
We don''t want to reposition them by hand on
snaplines.
Is there something for bom balloons like
there is for dimensions, clean up dimensions.
 
In Wildfire (Drawing mode):

Edit-->Cleanup-->BOM Baloons


You will still sometimes need to clean them further or reposition them in a more logical manner, but it will save you a lot of time when you have hundreds of baloons to work with.

-Mark
 
Sorry, we are still working on Pro/e 2001
 
Vanpeltnv

Are these live baloons or make baloons? You can place make baloons as an offset to live baloons, so when the live baloons move the make baloons move. You can also relate the make baloons to a view, so when the view moves the baloons move with it.

Tofflemire
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top