Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
BOLTS
- Thread starter kali_0142
- Start date
MikeHalloran
Mechanical
"This" is acceptable to whom?
What is 'this'? Using a M14 bolt in a 5/8" threaded hole?
Who would justify that?
Some discussion re B7 vs. B7M:
Read that, and get back to us if you have a coherent question.
It's okay to use more words.
Mike Halloran
Pembroke Pines, FL, USA
What is 'this'? Using a M14 bolt in a 5/8" threaded hole?
Who would justify that?
Some discussion re B7 vs. B7M:
Read that, and get back to us if you have a coherent question.
It's okay to use more words.
Mike Halloran
Pembroke Pines, FL, USA
LittleInch
Petroleum
And read this one also
Basically NO, you can't use MXX sized bolts on ASME B 16.5 flanges
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
Basically NO, you can't use MXX sized bolts on ASME B 16.5 flanges
Remember - More details = better answers
Also: If you get a response it's polite to respond to it.
- Status
Similar threads
