Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Blow-down studies

Status
Not open for further replies.
Melimelo

Melimelo

Chemical
Joined
Sep 25, 2008
Messages
67
Location
FR

Hello,
Have you some information on how to do a blow-down study?
I mean all the steps to follow and so on...
Is there any useful site or pedagogical ressources on the web?
Thanks a lot!
Méli :o)
 
Sort by date Sort by votes
If you are working for an oil company they will most likely have en engineering manual going through this.

If not: Try asking a more experienced colleague! Site like this are good for questions that are a bit more specific - or perhaps a little more broad....

Best regards

Morten
 
Upvote 0 Downvote
Meli..

IMHO....

Be careful....Using terms such as "pedalogical resources" sends most engineers running to thier dictionaries.

: )

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

wd1980
  • Locked
  • Question Question
Back pressure in the blow down Valve
Replies
1
Views
529
LittleInch
LittleInch
Pavan Kumar
  • Locked
  • Question Question
Blow Down Vessel Sizing
Replies
0
Views
164
Pavan Kumar
Pavan Kumar
Vivaldi M. Smith
  • Locked
  • Question Question
Alternates Air supplies to Flare Air Blower
Replies
1
Views
287
georgeverghese
georgeverghese
Jack Nicholson
  • Locked
  • Question Question
approximate required liquid mass to tank cool down
Replies
12
Views
721
LittleInch
LittleInch
ZRowe
  • Locked
  • Question Question
Air System Blowdown Analysis Struggles
Replies
7
Views
578
ZRowe
ZRowe

Part and Inventory Search

Sponsor

Back
Top