Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Blast Loads on Frames

Status
Not open for further replies.
mikemot420

mikemot420

Structural
Joined
Sep 8, 2004
Messages
1
Location
US
I've been working on ABAQUS for about 6 months now and I've been trying to put blast loads along the columns of a simple frame. I have them modeled as line loads right now, but I am getting a notable amount of out of plane behavior and nonsymmetric strain across the section points of my I-beam, which I can't explain because all of the loading is in the xy-plane.

Any help would be appreciated
 
Status
Not open for further replies.

Similar threads

V
  • Locked
  • Question Question
Tensioned element and loads
Replies
2
Views
1K
valbe
V
IcarusAero223
  • Question Question
Mesh singularity on non-manifold geometry
Replies
5
Views
10K
IcarusAero223
IcarusAero223
B
  • Locked
  • Question Question
Concentrated Force on a Rigid body reference point
Replies
2
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran
ElakiyaT
  • Locked
  • Question Question
Distributed shell edge loads
Replies
3
Views
593
FEA way
FEA way
shashank306
  • Locked
  • Question Question
Query on mesh size
Replies
3
Views
678
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top