tominsky67
Mechanical
Can the default black color of the contour lines be changed in draft mode of Version 15??
tom..
tom..
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Black contour lines in draft 1
- Thread starter tominsky67
- Start date
- Status
-
1
- #2
beachcomber
Mechanical
What do you mean by 'contour' lines ?
Do you mean the normal outlines of part edges ?
If so you can modify the 'visible' line style to whatever colour you want or create a new coloured linestyle and set all visible edges to use this one.
Look under Format>Style.
bc
Do you mean the normal outlines of part edges ?
If so you can modify the 'visible' line style to whatever colour you want or create a new coloured linestyle and set all visible edges to use this one.
Look under Format>Style.
bc
- Thread starter
- #3
tominsky67
Mechanical
Great! That's what I was looking for.... knew it had to be somewhere!
Thanks
Thanks
beachcomber
Mechanical
Tom,
You can also create different coulours and apply them to different parts within the draft, by setting the visible edges linetype for the part within the draft view display properties.
You could get quite sophisticated results using the query command in there to find all parts of the same name and apply a particular style to them all. (eg all M6 screws green)
bc
You can also create different coulours and apply them to different parts within the draft, by setting the visible edges linetype for the part within the draft view display properties.
You could get quite sophisticated results using the query command in there to find all parts of the same name and apply a particular style to them all. (eg all M6 screws green)
bc
- Status
Similar threads