big problem

[gurveen]

I have to do some printing work on my 3d model ( text writing and some circuit diagram ).

1)I want text to appear in filled black color. In part modeling filled font does not appear like filled ( like in drawing )



2)If I use cosmetic sketch with hatch than how to modify its hatch spacing and color?



3)Same problem with closed hatched datum curve . don

 

[airion]

Sounds like you could make this feature using a surface, then change the color of those surfaces to black. Surfaces have no thickness so it should be a good solution for you.



Good luck.

 

[proedesign]

There is a way to modify the x-hatch of a cosmetic sketch in the Pro/E drawing.

First click on the cosmetic sketch (TIP: if you have problems to selecting it, zoom out first and then click on it), after this right click and choose properties (or go to edit>properties on top menu), this will take you to the MOD XHATCH menu where you can actually change the line spacing, line style and other properties. Good Luck!,

 

[gurveen]

thanks proedesign for your reply

but i want to do it in part model not in drawing