Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

bidimensioned fill patten

Status
Not open for further replies.
glassmaker

glassmaker

Automotive
Joined
Jan 17, 2002
Messages
33
Location
US
I want to create a fill pattern of points on a surface. I need to points to be spaced 1.625" horizontally and 2.00" vertically. A Creo fill pattern only accepts dimensions in one direction. Does anyone know of an alternative method?
 
Status
Not open for further replies.

Similar threads

rfer
  • Locked
  • Question Question
Fill Sketch
Replies
2
Views
775
rfer
rfer
carguy333
  • Locked
  • Question Question
Filled Sketches Shown In Drawing
Replies
2
Views
696
carguy333
carguy333
Tunalover
  • Locked
  • Question Question
Getting text in cosmetic features to fill or densely hatch
Replies
0
Views
150
Tunalover
Tunalover
P
PTC Creo Arial filled / bold font required please.
Replies
1
Views
5K
dr_gallup
D
C
Using relations to fill a yes no user defined parameter based on file creation
Replies
0
Views
3K
CPSCGuy404
C

Part and Inventory Search

Sponsor

Back
Top