Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Best Tip for NX users 1

Status
Not open for further replies.

Arkance/PhoeNX

Mechanical
Joined
Mar 2, 2010
Messages
870
Location
AU
If you're asking a question, please please please can you list the version of NX you are using (Help -> About NX -> System Information)?
I wish I had a dollar for the number of times I see posts with no versions and then someone responding, (usually John R Baker [wink]) asking for the version.

I work support in Australia and see the same issue everyday, so please, first thing before you write your question is to list your NX version.


Anthony Galante
Senior Support Engineer

NX5.0.6, NX6.0.5, NX7.5.5, NX8.0.0 -> NX8.0.3
NX8.5.0 -> NX8.5.3, NX9.0.0 -> NX9.0.1
 
Just include this information in your Signature as some people have done, including Anthony ;-)

That way you don't even have to think about. The only thing that you need to remember is that you'll have to update your signature data whenever you go to a new version of software or update your current version(s).

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top