jskernahan
Mechanical
Has anyone had any experience with Beric Valves?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Beric Valves 1
- Thread starter jskernahan
- Start date
- Status
Seems like you haven't had much luck here; have you tried posting on LinkedIn?
High-alloy valves for corrosive petrochemical applications.
High-alloy valves for corrosive petrochemical applications.
- Thread starter
- #3
jskernahan
Mechanical
I haven't had much luck at all! But I have decided to go ahead and use the valves. Apparently Exxon has these valves in service and the they are manufactured to the specifications needed for my application. Delivery time was the reason I was considering using them so I was on a short time frame for a decision. I will let everyone know if I have any problems with them!
-
1
- #4
I have used a limited amount of them and have not had any problems. They are just another OEM branding valves shipped from different locations in China. I have met with one of the partners and he is an honest stand up guy. I would say for standard material valves they should not be any different from any other 20 standard manufacturers.
- Status
Similar threads
- Question