Bending Simulation

[camilia]

Can anyone comment/Guide a bending simulation at 90 angle and see stresses at 90 angle?

 

[rstupplebeen]

Turn on nonlinear geometry and make sure you have appropriate nonlinear material properties such as hypereslasticity. I hope this helps.

Rob Stupplebeen

https://sites.google.com/site/robertkstupplebeen/

 

[camilia]

While bending the workpiece (blank) seems to penetrate into the die part....can any one comment how to make an interaction between workpiece and this curved part of die to avoid it?

 

[portliner]

Model the die as a rigid surface! In the *contact pair the rigid surface must be the master surface

/Stig