Bearing Load

[Kris1985]

Hi... Can anybody help my in applying bearing load as a pressure in Patran 2010? I want the load to be applied over a 60degree region of the cylinder only.

Thanks in advance

 

[afrancese]

Hi All,
How I can write a batch file for Nastran to run some bdf files in sequence?
Thanks a lot,
Art

 

[Onda]

In this thread you can find how to run dos batch file to run some bdf in sequence

http://www.eng-tips.com/viewthread.cfm?qid=270534&page=1

For the bearing load, You should create a cylindrical coordinate system and apply the load in this coordinate system.
If you want the load to be applied as a function of the angle you should make a field.

Onda