Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

varying the value of the force with the value of inertial load

Status
Not open for further replies.
ziko16

ziko16

New member
Joined
Dec 29, 2017
Messages
3
Location
LB
Hello everyone,

I would like to ask if it is possible to create a force that changes with the different values of inertial load. For example, I have a mass of an engine that should vary with the g force, is it possible to input only the mass in kg somehow and while changing the inertial load the corresponding weight will be obtained automatically for each analysis.

Thanks in advance,
Zaki
 
Status
Not open for further replies.

Similar threads

MihaelaN
  • Locked
  • Question Question
Threaded connections modelling with frictional contact in Patran/ Nastran
Replies
0
Views
2K
MihaelaN
MihaelaN
nmruble
  • Locked
  • Question Question
Bush Element /Spring Element, what is the difference?
Replies
1
Views
1K
dmapguru
dmapguru
gandoglassy
  • Locked
  • Question Question
Combine several cross-sections with Patran arbitrary shape tool (Beam Library)
Replies
0
Views
693
gandoglassy
gandoglassy
lavecchiasignora
  • Locked
  • Question Question
Read or Import a set of nodes
Replies
1
Views
891
dmapguru
dmapguru
nmruble
  • Locked
  • Question Question
Implicit Nonlinear - Contact - Combination of Bolted (with preload) and Pinned Connections
Replies
2
Views
2K
nmruble
nmruble

Part and Inventory Search

Sponsor

Back
Top