Bearing identification (

[Superslinky]

I'm trying to identify a bearing and thought someone here may be able to help.

O.D. 30mm
I.D. .3125"
Outer Race Length .686" (17.4mm)
Inner Race Length .970" (24.6mm)

The inner race only extends in one direction and appears to have been machined so there's no telling what the original bore was or how long it could have been. There are no markings anywhere on the part. It may also be a cam follower of some type.

I'd appreciate any help.

Thanks,

 

[Superslinky]

I should have also posted this image as well. This image illustrates how these bearings are being used. I believe it would be call a sprag clutch of sorts but correct me if I'm wrong.

 

[RajuKanumuri]

Try this link--- will lead to a pdf file of Renold Sprag Clutch info
go to the page # 18

http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=2&ved=0CDkQFjAB&url=http://

http://www.renold.com/nmsruntime/sa...ZfaGjeQWvTvzHOdXDFY5oEQ&bvm=bv.46751780,d.eWU