Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

BCl3 Bottle Chiller

Status
Not open for further replies.

iconchris

Chemical
Joined
Aug 8, 2003
Messages
7
Location
US
I am looking for a small chiller wrap to wrap around a bottle of BCl3. The diameter of the bottle is approximately 3 inches. I realize that we usually heat this stuff, but I'm trying to do something a bit different. I was wondering if there is a pre-packaged wrap out there that I can flow some cooling water through. I need to get the BCl3 down to about 14 degrees C. Any thoughts would be appreciated.
 
Is this for lab or for production? How fast do you want it
to be? Any other requirements or limitations ?

<nbucska@pcperipherals.com>
 
Right now it is for a lab environment that could hopefully switch to a production installation. I have no idea what you may propose so I do not want to set any limitations yet.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top