Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Battery Vibration Test

Status
Not open for further replies.
Sparky2003

Sparky2003

Electrical
Joined
Jun 16, 2003
Messages
23
Location
NL
I am currently looking at designing a Battery in a Transport Refrigeration unit application. Due to space constraints, I have to mount the battery vertically. As part of the vertical mounting, I will be doing a shaker table vibration test. How should I check the battery after the test and what should I be checking for. Are there any parameters I should be checking before the test. Any help would be appreciated.
Thanks.
 
Status
Not open for further replies.

Similar threads

N
  • Locked
  • Question Question
High-Power Lithium-Ion Battery Testing, Rapid and Non-Invasive Methodologies
Replies
0
Views
1K
Nick Peroulax
N
k2panman
  • Locked
  • Question Question
(Old) Electrical Engineer - how does an active BMS work on an LFP battery
Replies
0
Views
837
k2panman
k2panman
racookpe1978
  • Locked
  • Question Question
New NiCd battery in small appliance, internal charger/inverter. Should I discharge it, then fully recharge for best long-term performance?
Replies
0
Views
1K
racookpe1978
racookpe1978
BjMag
  • Locked
  • Question Question
Predicting the time for replacing Li-Ion battery
Replies
13
Views
1K
IRstuff
IRstuff
Alms88
  • Locked
  • Question Question
Battery watt-hour
Replies
4
Views
1K
itsmoked
itsmoked

Part and Inventory Search

Sponsor

Back
Top