Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
BATCH PLOTTING
- Thread starter kmacsys
- Start date
CHECK OUT THE FOLLOWING PROGRAMME CALLED HURRICANE, IT ALLOWS YOU TO CREATE SCRIPT FILES FOR MASS PROCESSING.
ALSO
AUTOM8 AT
ALSO
AUTOM8 AT
CADCAMMIKE
Mechanical
My Batchplot utility crashed on me the other day so I went searching for a good replacement that was faster!
This one was the best that I found
It is a batch script utility. Gives you a log file for each operation and individually times them. Log file said 8 sec per print when I ran a print script file.
It is shareware $35USD to register, but the unregistered version will do up to 20 files! Most of the other software I tried would only let you do 10 or 5 or even only 3
This one was the best that I found
It is a batch script utility. Gives you a log file for each operation and individually times them. Log file said 8 sec per print when I ran a print script file.
It is shareware $35USD to register, but the unregistered version will do up to 20 files! Most of the other software I tried would only let you do 10 or 5 or even only 3
Try a FREEWARE program called EZscript-Pro.
You can find it at If you need help with a plotting script, just ask me.
Mycad2
You can find it at If you need help with a plotting script, just ask me.
Mycad2
- Status
Similar threads