Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Basis of ASME B16.5 Flange "Class"

Status
Not open for further replies.
GWK

GWK

Mechanical
Joined
Mar 21, 2002
Messages
5
Location
US
Please explain the basis of flange Classes as found in ASME B16.5. I suspect that the original meaning and basis of this flange term has been lost. Thanks,GWK
 
Sort by date Sort by votes
Try this thread:
408-21855
It is in the valve forum, page 6.
 
Upvote 0 Downvote
Thanks for the tip. I appreciated the reply you posted on the other thread. GWK
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

X
  • Locked
  • Question Question
B16.5 Max Flange Hydrostatic Test Pressure
Replies
8
Views
7K
TGS4
TGS4
Ing. Aponte
  • Locked
  • Question Question
Piping class building
Replies
3
Views
2K
Snickster
Snickster
FPPE
  • Locked
  • Question Question
ASME B31.3 - 1/2" elbow obtained from bended tube in ASME SB-165 N04400
Replies
4
Views
440
david339933
david339933
PagoMitch
  • Locked
  • Question Question
Removal of rust inside improperly stored 6" steel piping
Replies
16
Views
1K
PagoMitch
PagoMitch
nikolastrojman
  • Question Question
Piping Class Design relationship with PED
Replies
2
Views
2K
XL83NL
XL83NL

Part and Inventory Search

Sponsor

Back
Top