Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Basic Structural System - equipment pad

Boiler106

Structural
Joined
May 9, 2014
Messages
214
Location
US
this is a dumb question, for sure, but does anyone know how i might describe the basic structural system on my design criteria section for a project that just consists of an equipment pad in a high seismic zone? Should i list it as "N/A, Ground Supported Slab"?
 
Rigid non structural component on ground support slab. ?
 
"N/A, slab only" if you want it specifically just for the pad.
For pad + equipment, maybe "Steel distributed mass cantilever structure" or "Inverted pendulum type structure" (pulling choices off Table 15.4-2 in ASCE 7-16).
 
Ground supported mat slab foundation?

Says the same thing as others, just different words.
 
the basic structural system on my design criteria section for a project that just consists of an equipment pad in a high seismic zone?
I looked ( Guidelines for seismic evaluation and design of petrochemical facilities ) and the book uses the wording Ground Supported Non-Building Structure.
The foundation : Ground Supported Mat.
 

Part and Inventory Search

Sponsor

Back
Top