Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

basic beam 1

Status
Not open for further replies.
sereze

sereze

Civil/Environmental
Joined
May 30, 2007
Messages
6
Location
TR
I run anylise for a basic beam and got moments and shears every half meters. What if I want to see them every 1.20 meters or something else?
 
Sort by date Sort by votes
What an unbelievable coincidence. I read your post and opened SAP. The hint that came up was for this exact question! That's a little spooky...

Anyway, select your beam and go to Assign, Frame/Cable/Tendon, Output Stations

Set it to whatever you want.
 
Upvote 0 Downvote
it seems that God wants me to this bridge design thingy :D. Thanks for the answer, there are 499 answers needed left.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Locked
  • Question Question
CSI BRIDGE "Design request" for Precast Concrete I Girder bridge does not work when the defined beam is nonprismatic !!!
Replies
0
Views
872
Abderrahmane Mche
A
J
  • Locked
  • Question Question
Question about the definition of transfer beams in a pile cap for a pedestrian bridge foundation
Replies
0
Views
2K
jcarlosamao
J
Civil_Structure
  • Locked
  • Question Question
"Weak beam-strong column" check for steel design in SAP2000
Replies
1
Views
409
X4vier
X4vier
mekafime
  • Locked
  • Question Question
truss beam
Replies
0
Views
213
mekafime
mekafime
Ferdy Hasan
  • Locked
  • Question Question
One Way Slab Self Weight is not calculated in beam analysis Sap 2000 V20
Replies
2
Views
425
johnie134
johnie134

Part and Inventory Search

Sponsor

Back
Top