Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

barium scale 2

Status
Not open for further replies.

tylang06

Petroleum
Joined
Feb 21, 2007
Messages
9
Location
US
Is there any way to dissolve barium scale? I know that acids don't dissolve it and if it is encountered in a well that it is typically milled out, but is there any other way to remove it from a wellbore without milling?
 
We use basol- some kind of dissolver/ chelating agent to treat barium scale in our wells. Speak to a specialist chemicals company: (our chemical specialist is Roemex), and they'll help you out.
 

Ba salts soluble in water according to the CRC manual:
acetate, benzoate, bromide, cyanide, sulfocyanide, iodide, ferrocyanide, etc.
 
Thanks for the valuable input!

The problem with barium scale that doesn't make it soluble in water though is that it reacts with different types of formation fluids to form barium sulfate or the like.

After speaking to some chemical guys, we've found that pre-treating the produced water in the well is the best way to keep barium scale out of a wellbore, that doesn't mean that it will keep it out altogether, but it at least it inhibits a build up of scale that must be milled out.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top