conditional78
Mechanical
I have a banjo fitting with the word "Bell" stamped into its side. Does anyone know who makes these? If it helps, the ID of the bolt is about 1/2" and both connections are male threads.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Banjo Fitting Manufacturer Identification Help 1
- Thread starter conditional78
- Start date
- Status
-
1
- #2
conditional78,
There are Banjo polypropylene valves and quick dis-connect fittings sold by U.S.Plastics. Not sure of the manufacture.
There are Banjo polypropylene valves and quick dis-connect fittings sold by U.S.Plastics. Not sure of the manufacture.
Try
They make the fittings shown in US Plastics catalog
They make the fittings shown in US Plastics catalog
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Question