BALLOON SIZE

[DABERT]

IS IT POSSIBLE TO SET-UP THE BALLOON SIZE TO BE THE SAME WITH ONE OR TWO DIGITS NUMBER.

THANK

 

[rickyt]

If you are refering to Catia V4, I put a space in the text before the single digit number. The text will be set to the oneside, but looks better than different size balloons.

 

[gdeaton]

In V4, Balloon sizes are defined under the DRWSTD function. Their size can be defined as dependent on the text size, or a fixed diameter as you requested. They are stored in the project file and you need write access to change or define them.