Nov 15, 2005 #1 mikeg8 Industrial Joined Nov 15, 2005 Messages 29 Location GB What US standards cover specification of ball valves? Are there international (ISO etc) equivalents?
Nov 15, 2005 1 #2 gsxra Industrial Joined Nov 14, 2005 Messages 8 Location US Check out ASME B16.34 or ISA S75.04 Upvote 0 Downvote
Nov 15, 2005 Thread starter #3 mikeg8 Industrial Joined Nov 15, 2005 Messages 29 Location GB Thanks gsxra. I knew of B16.34, but not ISA S75.04: I'll check it out. Upvote 0 Downvote
Nov 15, 2005 #4 Sircrashalot Mechanical Joined Jun 24, 2005 Messages 43 Location CA API 6D is common in the oil & gas industury. Andy Upvote 0 Downvote
Nov 15, 2005 #5 bcd Mechanical Joined Sep 27, 2002 Messages 519 Location US Another USA ball valve spec. is MSS SP-110. No ISO equivalent yet. bcd Upvote 0 Downvote
Nov 15, 2005 #6 JimCasey Mechanical Joined Oct 29, 2003 Messages 924 Location US ANSI ('scuse me: ASME) B16.10 seems to be used frequently for face-to-face. MSS-SP72 NACE MR01-75 API 6D ASME ( I almost did it again) B16.5/B16.34 Upvote 0 Downvote
ANSI ('scuse me: ASME) B16.10 seems to be used frequently for face-to-face. MSS-SP72 NACE MR01-75 API 6D ASME ( I almost did it again) B16.5/B16.34
Nov 15, 2005 #7 SJones Petroleum Joined Apr 22, 2001 Messages 3,945 Location GB ISO 6002 ISO 10434 ISO 15761 ISO 17292 ISO 14723 (if you are going subsea). Some of these standards will have some equivalency as per API 6D/ISO 14313 for example. Look them up. Steve Jones Materials & Corrosion Engineer http://www.pdo.co.om/pdo/ Upvote 0 Downvote
ISO 6002 ISO 10434 ISO 15761 ISO 17292 ISO 14723 (if you are going subsea). Some of these standards will have some equivalency as per API 6D/ISO 14313 for example. Look them up. Steve Jones Materials & Corrosion Engineer http://www.pdo.co.om/pdo/
Nov 30, 2005 #8 rsv Mechanical Joined Nov 28, 2005 Messages 17 Location GB API 608 & ASME B16.34 for design - press. temp ratings ASME B16.10 for Dimensional standard API 598 & 607 for Inspection & testing inc. Fire safe When you get to larger sizes / higher press. then there are no Dimensional std. in B16.34. Upvote 0 Downvote
API 608 & ASME B16.34 for design - press. temp ratings ASME B16.10 for Dimensional standard API 598 & 607 for Inspection & testing inc. Fire safe When you get to larger sizes / higher press. then there are no Dimensional std. in B16.34.