Steelguy24
Automotive
I have a dumb question. Can Bake Hard Electro-Galvanized be welded?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bake Hard Question
- Thread starter Steelguy24
- Start date
- Status
I'm certain it can because this material is designed for automotive bodies that are normally spot welded. The bake hardening effect comes from excess Phos. During the paint bake the steel actually age hardens slightly. (I forget what SAE J#### to look at but the specs are in there.)
Yes, eletrogalvanized bake hardening steels can be welded. The appropriate standards are SAE J1562 Selection of Zinc and Zinc-Alloy (Hot-Dipped and Electrodeposited Coated Steel Sheet and SAE J2340 Categorization and Properties of Dent Resistant, High Strength, and Ultra High Strength Automotive Sheet Steel.
Regards,
Cory
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
Regards,
Cory
Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.
- Status
Similar threads
- Locked
- Question
