Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Backout factors
- Thread starter no2metal
- Start date
SWComposites
Aerospace
Which property? stiffness? strength?
To get UD E1, you will need data for E2 (or make an extimate), then use laminate theory to back calculate E1 from Ex of the 0/90 laminate
For UD tensile strength, calculate the P/AE strain for the 0/90 laminate, then multiply the strain times the UD E1 to get UD tensile strength.
To get UD E1, you will need data for E2 (or make an extimate), then use laminate theory to back calculate E1 from Ex of the 0/90 laminate
For UD tensile strength, calculate the P/AE strain for the 0/90 laminate, then multiply the strain times the UD E1 to get UD tensile strength.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question