Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Backhoe Swing Frame force calculation

Status
Not open for further replies.

Jay T

Mechanical
Joined
Mar 17, 2023
Messages
5
Location
CA
Based on the details of digging force, hydraulic cylinders, I would like to calculate forces on the swing frame of a backhoe. Following are the details as per attached images,
  • BC1 - Reach diagram for the backhoe
  • BC2 - Hydraulic specs and swing details of backhoe
  • BC3 - Force details, hydraulic cylinder details
  • BC4 - Markings for which forces are to be calculated on the swing frame
  • BC5 - Dimension details of the backhoe based on swing frame reference
I would like to solve this problem using static equilibrium
 

Attachments

  • BC5.JPG
    BC5.JPG
    84.5 KB · Views: 1
  • BC4.JPG
    BC4.JPG
    37 KB · Views: 1
  • BC3.JPG
    BC3.JPG
    51.1 KB · Views: 1
  • BC2.JPG
    BC2.JPG
    98.5 KB · Views: 1
  • BC1.JPG
    BC1.JPG
    33.1 KB · Views: 1
OK, and what is your question?
 
  • Haha
Reactions: eea
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top