Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

B16.5 tolrances

Status
Not open for further replies.
Murec

Murec

Mechanical
Joined
Aug 2, 2006
Messages
74
Location
US
How are the tolerances in B16.5, para 7.2 measured?
Where is the center, the end and the contact surface (as in contact surface to contact surface)?

Thanks
M
 
Sort by date Sort by votes
Murec, I think if you refer to, for example, Table 9 it will become clear.

Regards,

Mike
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

L
  • Locked
  • Question Question
ASME B16.5 Flange Hole Chamfering
Replies
7
Views
2K
Compositepro
Compositepro
Zachary Gagnon
  • Locked
  • Question Question
Coupling a DN400/PN10 flange to a a B16.5/150 Butterfly valve
Replies
7
Views
468
LittleInch
LittleInch
bryansonnier
  • Locked
  • Question Question
ASME B16.5 Flange Design vs Bolt Tension
Replies
4
Views
885
bryansonnier
bryansonnier
jennin77
  • Locked
  • Question Question
Vibration loosening of bolts/nuts of B16.5 or ASME VIII bolted connections
Replies
1
Views
284
XL83NL
XL83NL
Headphone5
  • Locked
  • Question Question
ASME B16.5 Flanges, What is "Minimum Thickness For Lap Joint?"
Replies
4
Views
648
Headphone5
Headphone5

Part and Inventory Search

Sponsor

Back
Top