Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

B&S OQFRN fuse characteristics

Status
Not open for further replies.
Bung

Bung

Electrical
Feb 10, 2002
428
Does anyboody have the characteristics of the old B&S 12OQFRN fuses? I am particularly interested in getting the TCCs and the minimum breaking current figures as given on test certificates. Apparently the minimum breaking currents are NOT the same as the data published in the catalogues in the early '80s.

thanks

Bung
Life is non-linear...
 
Status
Not open for further replies.

Similar threads

G
  • Question
Generator Protection - Selection of Fuse based on Sustained Current
Replies
9
Views
6K
wcaseyharman
wcaseyharman
SEL487
  • Locked
  • Question
(Ontario) ESA banning S&C Vista Units after May 1st, 2025
Replies
1
Views
259
dik
dik
Umay Aeman
  • Locked
  • Question
Difference b/w C&DF and IR test 1
Replies
1
Views
177
Gr8blu
Gr8blu
tiftif
  • Locked
  • Question
CYME Largest Fuse Downstream
Replies
0
Views
170
tiftif
tiftif
electroctopus
  • Locked
  • Question
Microgrid Design & Analysis in Simulink
Replies
0
Views
193
electroctopus
electroctopus

Part and Inventory Search

Sponsor

Back
Top Bottom