Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Azimuth Angle

Status
Not open for further replies.
beauu

beauu

Petroleum
Joined
Jan 18, 2010
Messages
6
Location
US
I have an old directional survey from 1990 that shows the Measured Depth, Angle of Inclination, Direction Quadrant (East/West), True Vertical Depth, Latitude (North-South) (ft), Departure (East-West) (ft), Vertical Section, and Dog-Leg Severity, but not the Azimuth Angle. Is there a way to calculate the azimuth angle based on the information that is currently provided? If so, how would I do that?

Thanks!
 
Sort by date Sort by votes
How do you delete a thread?
 
Upvote 0 Downvote
Click Inappropriate post to red flag it, then ask for it to be deleted. No questions asked, if its the OP's thread and request.

**********************
"Pumping accounts for 20% of the world’s energy used by electric motors and 25-50% of the total electrical energy usage in certain industrial facilities."-DOE statistic (Note: Make that 99% for pipeline companies)
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top