Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
AWWA Flanges
- Thread starter loc23
- Start date
loc23,
To clarify my previous reply, the "NO" is for the ASME Boiler and Pressure Vessel Code. When I read your post about "ASME Code", I immediately thought of the vessel code because that is where most of my work is focused on. Of course there are other ASME codes like the ASME Code for Pressure Piping. Depending on the application, AWWA flanges are allowed on pressure piping.
To clarify my previous reply, the "NO" is for the ASME Boiler and Pressure Vessel Code. When I read your post about "ASME Code", I immediately thought of the vessel code because that is where most of my work is focused on. Of course there are other ASME codes like the ASME Code for Pressure Piping. Depending on the application, AWWA flanges are allowed on pressure piping.
- Thread starter
- #4
You were correct in your assumption. This is an ASME Code stamped vessel. So I am talking about the ASME Boiler and Pressure Vessel Code. We are contacting the vendor to find out why they stamped the flange B16.47 when it does not conform to that specification.
- Status
Similar threads
- Locked
- Question
