Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AWS D1.1 VERSUS TACOM 12479550

Status
Not open for further replies.
darrenholt

darrenholt

Military
Joined
Mar 2, 2012
Messages
1
Location
US
We are having an issue trying to find the difference between these specs on allowable weld thickness tolerance. There is a belief that the Mil spec is less forgiving than the aws spec. Looking for specific info and feedback to help us resolve this issue. Any help would be appreciated!
Thanks, Darren Holt
 
Sort by date Sort by votes
Not to be a wiseguy, but have you looked at the two welding standards side by side?

I'm not sure what you mean by "allowable weld thickness tolerances".


Best regards - Al
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

JT0202
  • Question Question
AWS D1.1 2020 Group I to Group II Material PQR
Replies
0
Views
2K
JT0202
JT0202
ThaiVu
  • Locked
  • Question Question
AWS D1.1 - FILLET WELD BREAK TEST
Replies
7
Views
3K
ThaiVu
ThaiVu
JONI101
  • Locked
  • Question Question
AWS D1.1 : 10.25.2 - Tubular Connection Requirement (RT acceptance criteria)
Replies
0
Views
1K
JONI101
JONI101
mr_inspectorpants
  • Locked
  • Question Question
AWS D1.1 Prequalified Essential Variables
Replies
3
Views
3K
gtaw
gtaw
naquib
  • Locked
  • Question Question
WPS Qualification AWS D1.1 2020, Box to Box WPS Sample
Replies
0
Views
2K
naquib
naquib

Part and Inventory Search

Sponsor

Back
Top