Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Autothermal Reforming Catalyst

Status
Not open for further replies.
rezaeb

rezaeb

Chemical
Joined
Aug 18, 2003
Messages
13
Location
GB
It would be highly appreciated if anybody can tell me whether steam reforming catalyst can be used inside autothermal reformer in a methanol plant, considering the operating condition of the latter rather than former. Normally these two reformers need their own catalyst types in an ammonia plant.
Thanks in advance

 
Status
Not open for further replies.

Similar threads

abhivmairal
  • Locked
  • Question Question
Metallurgy for CCR catalyst facility
Replies
1
Views
204
MJCronin
MJCronin
vk1975
  • Locked
  • Question Question
Why Taper Bored flanges used on catalyst transfer lines?
Replies
5
Views
279
StoneCold
StoneCold
sshep
  • Locked
  • Question Question
Nuetralization of Nickel Catalyst Fines
Replies
0
Views
80
sshep
sshep
yoze
  • Locked
  • Question Question
How to minimize FCC catalyst escape while conveying?
Replies
1
Views
153
darwish53
darwish53
rezaeb
  • Locked
  • Question Question
Metahnol Catalyst particle density
Replies
1
Views
176
TD2K
TD2K

Part and Inventory Search

Sponsor

Back
Top