Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Autocad menu (*.mns) -After editing, changes not appearing 3

Status
Not open for further replies.

CHAMP

Electrical
Joined
Feb 13, 2001
Messages
3
Location
US
After changing my menu file (acad.mns), I don't see any changes after opening a drawing. In the past, I had no problems adding addtional features to this menu.
 
You need to:
1. Close AutoCAD
2. Delete acad.mnc
3. Delete acad.mnr
4. Start AutoCAD

The .mnc and mnr files are created once the AutoCAD loads the updated menu files. If the compiled (.mnc) and resource (.mnr) files exist, AutoCAD will load them instead of the updated menu files.

Hope this helps!
 
Or you can type MENULOAD at th command line and browse and find the mns that you have edited and load it after you say ok to the browse dialog you click the loa dbutton then you should see some thing happen now if you added a menu pulldown then you will need to goto the menubar tab in the MENULOAD dialog and add the new Menu pulldown to you list of current ones
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top