Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SE2607 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Autocad 2012 - change overwritten font in multiple mleaders

Status
Not open for further replies.

labeattie

Structural
Aug 27, 2014
43
Hi all,

So I have a bunch of multileaders (50) which have a text style that uses simplex font. However, they have all been overwritten in the "in place mtext editor" to arial font. I'm determined to find a way to change them back to simplex all at once, but can't find anything. If this isn't possible, a way I could change each individual one in approx. 1 click would also be useful. You can't change one and then match properties with the others, but that would be an example of the second type of solution. I've run into this problem before, and any help other than "don't overwrite in the in place editor" and "change each one in the in place editor individually" would be greatly appreciated. But if you all think these are the only available options, I can change each one individually. I just feel like there has got to be a better way. I've attached a file with the multileaders, and am using Autocad 2012.

Thanks so much in advance,
labeattie

 
Replies continue below

Recommended for you

Thank you! That is exactly what I was looking for. I find it a little crazy that that capability is built into AutiCAD in the first place. Nevertheless, that worked excellently!
 
Wow. Sorry for the typing. I meant I find it a little crazy that that capability is not built into AutoCAD in the first place. Thanks!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor